Monday, November 4, 2013

Chevy returns to the stable!

Well the jeeps replacement has finally showed up. Presenting the latest addition to the Rallybimmer stable: a 2004 Chevrolet Silverado 1500 crew cab.
About 142,000 miles on the clock. Purchased for the princely sum of $10,000 from Miller Chevrolet in Rogers, MN.
So far it needs a gill and hood, driver seat needs a software update, temp gage is messed up.
I have already replaced the thermostat, radiator cap, and probably all of the coolant.
We have also taken most of the interior out in order to shampoo the carpet.
So far not off to a great start, but hopefully things will calm down!

Welcome chevy!
-gabe

Sunday, September 22, 2013

Fun with vintage metal!

I think part of the reason I like playing with bicycles so much is that they remind me of all the toys I had as a kid: I can take them apart and figure out how they work, clean, reassemble and have an even more fun little toy! Not to mention the historical aspects of vintage machines.

Wednesday, September 18, 2013

more work on the Trike

I love chrome polish and fine steel wool. It gives yous so much in exchange for a little elbow grease!
In this picture you can see that the rim does not look to be in very good condition. Now? looks like a charm! It still has pits and spots, but it is very shiny and handsome!

I also have received an email back from Worksman Cycles from my inquiry from them about this trike. Sadly they lost all records before 1965 in a shop fire so do not have anything from before that period. They do believe that it looks like an early model of theirs but nobody who currently works there has any particular knowledge of it.

The bed, which has E-LAB stenciled on the side of it also has the word SWORD painted over on the side, which might be interesting if I had any connection at FMC-NSD to find out what SWORD was, or what it stood for. For those who haven't read the previous post FMC-NSD made armaments, mostly for Navy ships, from WW2 through the 1970s, at which point they were taken over by various companies now composing BAE Systems.
I believe the sticker says Vehicle No. #302

I have also discovered that the front rim is strung to a Bendix Type K hub, and the rear free hub is too rusted to make anything out yet.
Cheers!
-G

Thursday, September 12, 2013

New project! Tricycle!

So when I worked at John Deere, in Dubuque, they had lots of very heavy looking tricycles that some people rode back and forth between areas in the mile long factory. Fast forward to now (September 2013) and I am working at Polaris Industries in Wyoming, MN and they have doubled the size of the facility. Unfortunately with the increase of floor space comes the problem of how to get form place to place.
I knew right away that industrial trikes are a perfect solution, and still very much produced and used.

Me being the guy I am I could not bring myself to purchase a NEW tricycle, that would cost a bunch of money and be way to easy. So I browse local craigslips ads every once and a while and sure enough I finally come across and ad for an affordable amount!
A few emails and a phone call later and we are at Tim's house in Big Lake MN and negotiating a sale (this whole encounter is a story for another time! very entertaining and a great guy).

I end up taking the one that has a tailgate on the box, and solid tires. I figure those to features will make it the more value added trike of the two he had.


There is an FMC - NSD vehicle sticker on the neck, and some interesting labels on the bedsides (E-LAB can be seen in the photo and there is SWORD under the paint along with something else I can't make out yet and well as some stencil looking words on whats left of the cushion lining)

A little history of where this trike likely spent most of its life.
http://fieldguide.fmr.org/site_detail.php?site_id=33

I have not received any feedback from the current Worksman cycles company about any background they might have but i am hopeful that there is still some connection between the company of yesteryear and today. I have discovered a number stamped into the bottom of the bottom bracket (a common place for ID numbers to be stamped on bicycles) but it does not tell me anything by itself.
So far it appears to have unique fenders: I have not seen any pictures on the internet or the current Worksman website with tubular fenders like these. The fenders actually hold the wheel on as well! I am guessing either the whole rear end of the bike was replaced at some point, or that this is a very early model that was discontinued when they switched to a different axle design.

The before picture:


So far I have removed the front wheel and done some serious Edd China on it and gotten back a good portion of the chrome! very excited for where this project might go! Wish us luck!

Tuesday, August 27, 2013

More crappy parts...grrr

So the BMW has been making odd cranky noises lately. Sounding very unhealthy going down these fine MN roads we have. So I finally got to investigating:
On the left are the caliper bolts from the rebuilt caliper I put on a few months ago. On the right are the original BMW pins that I had the foresight to keep!
It appears to me that the originals are some grade of stainless, and have a hex drive, instead of the rebuild pins that have my arch-enemy the torx drive!

I am going to try out using the original pins and seeing if that helps the clunk, wish me luck.

-g

Saturday, June 1, 2013

Wheeler Dealers

Okay readers. Those of you that know me personally know that I love British television, and I also love cars.  Since moving in with my new roommate Jake, he has introduced me to a little tele show form the BBC called Wheeler Dealers.

Whealer Dealers on Wikipedia

I cannot believe I had never even heard of this show before the last week or so!! This show could easily be me in either role, and the cars are TOTALLY what I would work with.

Regardless, if you have access to Velocity Network on your cable box, or have access to it over some video service: Check it out!

:)

Porsche engine mounts

So the Porsche has some wicked driveline lash. It has had it for quite sometime and I finally decided to try replacing the engine mounts in hopes that they would help. As readers will recall I recently moved back to the Twin Cities area and am renting a room in a basement while the rest of my life gets figured out. This means I don't have access to my own garage and tools that I have been living with.

So I decided to tackle the mount replacement in the driveway using a toolbox full of tools from my work collection and the emergency jack from the Porsche.

Ultimately the engine mount replacement is rather straight forward on these cars. I did have to run back to work to grab a few extra pieces I neglected to grab the first time. I also got denied warranty at BOTH Oreilly's Auto Parts and  NAPA, both on "lifetime" warranty hand tools. Craftsman and Snap-on for me from now on.







When I did finally get the old mounts out I was certainly glad that I was going through this! The old mounts appear to be very stretched out, to the tune of 1/2"+ so it is hard to say what is left of the mount internal fluids!








I also took some time to attempt to "patch" the gas tank vent line in the right front wheel well. The pipes had clearly been rubbed against the tire at some point. I wrapped them in a bit of fuel hose with some RTV smeared in. It definitely smoothed the idle out a little, though the idle is still VERY rough and a bit of a search left.

All in all I would consider this a successful day of wrenching!

Thursday, April 11, 2013

Porsche RS motor mounts

http://www.6speedonline.com/forums/996-turbo-gt2/255433-rs-motor-mounts-diy-w-pics-part-nos.html

Found this write-up today on using the 964 RS trim engine mounts on a 996. I think I might go this route once the bank account decides to have money in it again. Looks like almost $450 worth of parts which is a bit harsh i think, but I will see what can be hashed out.

:)

Wednesday, April 3, 2013

BMW oil filter housing gasket

The old gasket has the consistency of soft sandstone. Slightly embrittled!

BMW oil filter housing gasket.

So the Ci has been leakin oil from the side of the block from quite some time. I decided I had best fix it now before I end up moving into a shitty garage-less apartment.
The gasket itself is an o-ring style gasket that goes between the engine block and the oil filter housing. Getting parts off is the hardest part!
I discovered some rather strange wear on the pressure valve when I got the block off. Not sure what to think of it yet. Probably going to throw it back on like so! :)



Relic

Wow, started sorting through stuff in anticipation of the upcoming move and look what I found. Class ring...man was I cool back then! :)

Wednesday, March 27, 2013

Sometimes you just can't win...and sometimes you can!

Well, I managed to get some of the drive dilute problems on the Porsche figured out. Since there are a number of areas that appear to have original parts I am assuming that very little has been done to this car in terms of maintenance.
Since I was expecting some spark plug tubes to show up soon I thought I would go sink in the garage and get the car on stands, etc.
I decided that I should probably take the throttle body off and make sure it is clean. It is fairly straight forward to get everything off with minimal intrusion into anything complex.
I took the ICV, or AIC, servo off the TB and sure enough: caked with some nasty sooty stuff. I liberally applied much carb cleaner and let it sit a few minutes, then plugged the servo into the wiring and turned the ignition on. No reaction.
This is a good thing! Either the servo is shot completely, or it needs more cleaning.
So more carb cleaner, and more poking and scraping with a tiny screwdriver. Then another plugin session with no results. Now I acknowledge that it may likely be shot, so no harm in using a little manual adjustment: plug it in, power it up, and proceed to whack it on the top of the power steering pump that is conveniently siting there: Pop! Buzzzzz.
Working ICV! Great success!
A shot of WD for good measure and I bolted everything back in. Fired the beast up and, miracle of miracles, it now idles down to about 900 RPM!

Sunday, March 24, 2013

Good Porsche writeup

Of course, being the new owner of a Porsche Carrera2, and a self-titled wrench head, I find reading about other peoples mods and experiences to be very helpful. (assuming of course that their writeups are worth reading!)

http://www.renntrack.com/forums/showthread.php?474-Porsche-996-C2-to-GT3-Mods-Project

This is a series of posts about one shops conversion of a 99 C2 to a more track-worthy car. I like the first couple of pages so far so i thought I would share!

Budget is tight for me right now, so i will likely not be doing much past maintenance in the near future, so hold tight! :)
-Gabe

Monday, March 18, 2013

Interviews suck

Well, I have my interview at Polaris Ind in a couple hours. Tomorrow I have my I yer ire at Phillips n Temro. My nerves are fricking shot. Can't sleep, but the upside is that I am so strung out that I do t notice how badly my back aches. *sigh*
I need a vacation already!

Tuesday, March 12, 2013

More smoke

Well I didn't get much progress today. After a long day of driving and interviews I didn't want to do much of anything. I thought perhaps working on this contraption would settle my mind a bit.
So I busted out the duct tape to try to mitigate some of the smoke leakage and figure out why the thing belches smoke everywhere but the hose port.
I got mixed results and then thought I would go back rot the hot iron model for a while. Sadly when I hit the lid with a drill bit it decided to fling the can of warm baby oil all o er the bench. I had had enough. So little positive progress, and now I have a mess to clean up and a prototype to rebuild. *sigh*

Sunday, March 10, 2013

Smoke machine 2 mid process

A mid process picture. If you get this far you should probably enjoy a cold beer while the JB hardens

Smoke machine #2

Okay, starting on concept 2 tonight. I got some last minute inspiration from a rather brief you tube video here.
The beauty of this concept is having a fan on the unit means you don't need shop air to keep the smoke flowing!

Tuesday, March 5, 2013

Porsche 3.4L spark plug tube o-rings

So, as with all things designed by an engineer and then added to a marketing organization called "product support" things that should have been simple become very complex.
Take the Porsche M96 engine in my new porsche carrera. It has six spark plug tubes (later the design was thankfully changed to not have this feature!).
These tubes are sealed and held in place by a captured o-ring on each end. You can buy many combinations of the tube and o-rings from various sources. As somebody with an engineering background I saw the asking price for these o-rings and immediately recognized that the Porsche brand was again inflating prices.


Large spark plug tube Oring

When the parts catalog is examined it gives the following spec: 27.94x5.33

a quick consultation with a google search results in AS568 as a specification for o-ring sizes, and -320 as the size meeting those dimensions.

Now to amazon to discover that rather than pay $7 for one oring i can, in fact, get 10 o-rings for less than $7!
Or further goggling and you can discover that over at oringwarehouse.com, where they have a $5 minimum I have to buy 25 of these beauties!

incredible.

Small o-ring
parts catalog spec: 25.07 X 2.62this spec = AS568-120Similar to the above o-ring, this one costs about 10 cents. even in soft high temp silicon.:)

Sunday, March 3, 2013

Out with the old, in with the new!

Turns out after 60,000 miles spark plugs look pretty sooted. Fine besides that though!

Saturday, March 2, 2013

Meyle comes through again!

Now I don't have any proof that the Meyle HD parts I've put on the rally bimmer are any better, but they sure do look the part!

Tuesday, February 19, 2013

Daddy's got a new pair of shoes!

Next day delivery from tireRack at no extra charge? Yes please!

Saturday, February 16, 2013

Yay wreck rebuild

I just saved myself $30 by finding my missing headlight mount hanging on or dear life on the bottom of the passenger radiator! Hooray!

Tuesday, February 12, 2013

Porsche Becker CR210

For all of those fellow porsche owners out there who think the factory stereo is the bomb: Let me introduce you to the Porsche/Becker radio code decoder tool:
Porsche Resetting Radio Code

So I tried this two nights ago and got a code that didn't seem to work. So I went back to RennTech Forums and posted my problem to Loren, an Admin there, who sent back the EXACT SAME code I got form the java decoder!

So may thanks to Loren, and his imense patients and resources for getting these codes (no idea where from) but even more thanks to him for writing the Lost Radio Code FAQ which prompted me to read the owners manual and figure out how to actually enter the radio code so that it would unlock the radio!

So thank you internet once again!

Monday, February 11, 2013

First drive (kind of)

I did it! took the Porsche out for a, kind of, first drive.

It was a terrible day to go on a shakedown run but we didn't run into any problems so I think it was a success! Temperature was a little about freezing and it rained all morning. Roads were heavy with salt/gravel that they LOVE to spread down here in the south-west corner of Wisconsin.

Amazingly the nearly bald tires and occasional encounter with ice gave the car no problems. Traction control and ABS are functional. The airbag light that now has a light bulb in in unfortunately is lit up all the time.

Engine temps never rose above half on the gauge. Oil pressure stayed above 3 bar the whole time (was hovering around 2 bar on the drive home from SC). Tires held air. The car smelled hot and oily by the time we got back to the garage and the high+rough idle had returned which is disappointing.
I noticed that the car still has a bit of a miss when accelerating between 3-4k RPM which I am hoping is related to the same problem as the high idle.
It is on the project list!!

Cheers,
Gabe

Sunday, February 10, 2013

Nothing a little JBQuik can't fix!

I feel Porsche fanatics cringing already!!

JBQuik porsche mirror

Carpets

Anybody who has bought a used car has probably dealt with nasty carpets. Most cars I've had have had some sort of holes, stains, stinks, etc. this time Leann is going all out. We tried the can foam sprays (good results in the past) but they didn't cut it this time around.
Bring in the big dogs! Introducing the Rug Doctor!

Spark plug access?

Yeah, next time around this will be easy! Only because all of the rusted fasteners have snapped and are being replaced with nice metric stainless fasteners from BelMetric!
Below is the reverse of removal except for the bumper cover.







Discoveries

So in purchasing a salvage title vehicle you always are assuming a certain amount of risk. I have owned salvage titled cars most oft life, some are spotless, others have obvious damage that doesn't affect the usefulness of the vehicle, and now I have a vehicle that has damage an problems.
On the drive home with this Porsche the handling was useless and tons of vibration coming from the travel. It also wandered quite bad though it is unclear if that was loose suspension or the stupid big tires I had.
This leads us to the dissection of the front end.
Picture 1- bent passenger front control arm.
Picture 2- JBWelded front upright. Also visible I'd the brake line coil and of you look close enough you notice the brake caliper is not mounted straight.
Also known is some clicking from the front strut mounts.




COP tester

This is the coil and ignition tester that I purchased recently (from some crazy website here). I have wanted one of these for quite some time but never bothered till now. I'm glad I did too! After changing the spark plugs I fired up the Porsche and ran around testing the coils and sure enough one was not firing. I swapped coils and got all 6 on line.
Now I need to test the BMW coils!

Saturday, February 9, 2013

Trial post for the blogger app!!

Just trying this out for doing project updates directly from the garage!!! Wheeeee

Tuesday, January 29, 2013

The Porsche Procurement Story


So everybody apparently wants to know the details of around the Porsche. My silly friends!

I always wanted a 911 since I was into cars. I think most kids do. Never really thought much about buying one till maybe a month ago. I was sitting here looking at my monthly budget and the $20k joke of a Jeep parked outside. I thought to myself:
"Self, I bet for another $20k you could probably have a cheap Porsche."

So I started where every good tight-wad does: Craiglist!

I proceeded to find nothing much, so I hop on the backup eBay. Sure enough there are hundreds of Porsche 911's on there! Mostly newer models for a billion or two. But a couple days later a good looking black beauty shows up, listed in Chicago. I message the seller and arrange to come check it out on a Sunday evening.
This whole trip is a mini-story for over cold beers. I did not buy this one (though I tried after if showed up on Craigslist a week later) but I did sit in it and drive it around the block. Even though the transmission made more noise than the engine I could tell the chassis was different than your average car and the engine had lots of power.

Fast forward a couple weeks. Back on eBay again. I find a silver 1999 Carrera for dirt cheap. Major problem is that it is listed in South Carolina. I don't heed it much notice because of the distance problem but I add it to my watch list. The following friday I drink way too much coffee at work and before you know it have put in what I think is a "low" bid. Noon- no other bids. Before I leave for the day- no other bids. A few other bids did show up eventually but somehow my bid scheme netted me a winning bid.

WTF!? Did that really happen? Oh shit, it did. :)

So a few phone calls later prove that the seller does actually exist and is okay with us coming down on a weekend. Bank says okay, the next day two one way tickets are booked and the rest of the adventure starts taking shape. I will spare the planning details, but the actuality follows.

Friday was Leann's birthday so we left work early and headed up to Madison to have a pretty tasty dinner at The Old Fashioned with Kaitlin and our friends Alex and Katrina. A few drinks and we are all ready to crash for the night, staying at Alex and Katrina's.
About 2 AM we get up and get dressed, through the bags together and Alex drives us to the CoachUSA bus stop by his house. 2:35 we board a very comfy, sparsely populated, bus headed for Chicago-O'Hare airport. The first bus stops in Janesville where you switch to a different bus that goes to O'Hare (you can take a different one to Midway and downtown). About 5 minutes down the road the drive comes on the PA and says "I'm really sorry about the cold. The bus is not making ANY heat so i am going to get you guys a different bus in Rockford"
This event was at first a "oh no!" moment but the driver and the bus company came together and it went great actually. I will likely ride the Van Galder/CoachUSA bus again I had such a good experience!
So, we arrive at the US Airways terminal at about 5:05am. I go up to the self-check-in kiosk and attempt to enter our confirmation number. Nothing found. Try my name, my credit card, nothing gives an itinerary. We ask a ticket lady and Leann has some other schedule open on her phone and the lady says "oh thats not us it sounds like a Delta flight" so we wander off to the Delta counter, but half way there my brain finally wakes up and says "that was totally the wrong flight we told her" so we saunter back to the US Airways counter.
This time there is a large black man who approaches us. In a big black man voice "WHAT DESTINATION!"
Me "Uhhh....(think think think) Charlotte?"
Him "OKAY WE NEED TO GET YOU BOARDING PASSES AND THROUGH SECURITY RIGHT NOW!"
Me "(what the effff, what is going on again?)"
He proceeds to bark at the ladies behind the counter and they ask us for our ID's and start furiously pounding their keyboards while the Big Man start filtering through the crowd looking for other Charlotte bound people.
Finally we get our passes and he whisks us off to the TSA screening. At this point he zips down the "Military" line. I hesitate and look around like I am lost. He furiously motions us to follow and tells the ID checker guy that we need to get scanned RIGHT NOW. I had to laugh at this bit since all the other lines at the screening location were empty at this point, but it was kind of fun just the same. I also would not have gone down the Military line if there had been any Military personnel in it, as I respect that luxury they receive  Just sayin!
Oh, and before he sent us the through the Big Man finally divulged the secret: Our scheduled 7:45AM flight had been delayed 2 1/2 hours so they were trying to get anybody there on the earlier flight. NICE!

So we zip through Security and walk briskly to the gate. Which of course is damn near the last gate in the concourse! I believe we were the second to last people on the plane.
Total time spent in ORD, maybe 20-25 minutes. Total.

I try sleeping, but no luck.
We land in thick cloud cover at Charlotte, NC. We are now a few hours ahead of schedule so we check the flight board and there is an earlier flight to Greenville, SC. We talk to the nearest ticket desk and the lady informs us it is standby only but she will put us on the list. We grab some tasty southern breakfast from a BBQ joint in the airport. Then we wander out to the regional terminal and find out that most of the central eastern seaboard had been shut down the night before due to ice, canceled flights everywhere.
We make it to our possible flight's gate and get ready to take a nap. Soon they are calling a list of standby passengers. "Johnston!"
No way! i never get called! Sure enough we are rewarded with two seats on the early flight! BA.

Now we arrive at GSP and collect ourselves and a rental Accent. The rental counter guy gets the brief story of why we are there and then advises me that South Carolina does not issue salvage titles so to keep that in mind. Drive to Anderson, SC, to the amazingly shady office of AutoRV Mart.
Typical shitty car dealer, with the addition of a couple 5th wheel RVs and two Porsche's (they also had a Boxster on eBay I had noticed which I took as a positive sign)

Patrick the sales guy, and half the company, is about as slimy as I would expect i guess. The car has some obvious issues but I take it on the test drive and try to zone his jabbering out.
Ultimately I decide the good (Price) outweigh the bad (wobble/shake at speed, rough idle) and give Lauren, the other half of the company, the money and do paperwork.

So ends part one. INTERMISSION.

We leave Anderson, headed for the airport to return the rental car. I am driving the Carrera, thinking the wobble is not great but i have had much worse and hopefully it won't get any worse. I may as well say it right now- It never did get any worse, though the car clearly needs an alignment. But when I switched the headlights on and came up behind a truck I couldn't see and reflection of the lights. I also couldn't see any reflection of turn signals. I start to freak out, because I just made a huge rookie mistake: Left the car lot without checking the all the lights! I call Leann but she does not answer and she is a ways ahead of my now. I keep calling and no answers. I catch up to her and flash the highs, which she reacts to but does not stop or exit. I finally pull along side and wave my phone at her. She claims the phone was on vibrate. I think she was grooving out to the country station. *shrug*

So we finally pull off on the busiest exit on the damn highway and we determine that all rear lights work, no front signals and really dim yet visible headlights. I tell myself it is just the sunlight playing with my mind. We continue to the airport and Leann returns the rental.

I am ready to grab some food and hit the road, as is Leann, so we head out for the highway. My mind says "alright dude, you did it, you know can't really go back so you better mark your ride." So, I swing into the on-ramp and put my foot in it. About half way to the highway, at about 5-6k RPM, Leann starts yelling. I look up into the rear-view and HOLY SHIT!
Imagine the scene in a James bond when he deploys the smoke screen from his Aston. Yeah, this was crazy smoke. Can't see any traffic behind and the cloud is huge and clearly not going away so I crank the wheel to the side and hit the binders.
We both jump out pretty freaking quick, and I'm sure we both had the exact same thought "Where is the fire extinguisher!?" Of course there is no extinguisher in the car. I jump back in and kill the engine and pull the trunk release and jump to the back and pop the lid. Luckily no flames came billowing out, though it wouldn't have surprised me at this point!
We both stare at the engine for a moment as the cloud drifts across the highway. I stuck my face under the car and don't see any fluids gushing out of anywhere. I decide that I really don't want to be on the side of the highway, and really don't want to deal with any law enforcement personnel right now. So I  gingerly get back in and turn the key on- lights come on but nothing stays on that shouldn't, key start- chug chug, chug chug, again- chug chug, again- chug chug vroom!
Miracle of miracles it actually starts. It blows thick smoke from the drives tailpipe for a minute and then starts thinning. I decide to limp it to the next exit to investigate. Again miraculously, as I accelerate slowly the smoke goes away. The engine acts normally. I decide to speed up to highway speed and try the next exit. No problems at speed either.

Finally we do pull off the highway, at the BMW factory, I believe in Greer, SC, and snap some pictures and then hit up the Subway across the highway for some needed nutrients.

At this point the entire day comes crashing down on me and I get sick to my stomach. I have a very silent moment of reflection and feel like I have made some kind of ridiculous mistake.

After eating I check all the fluids and everything is right where it should be. Weird. At the time of writing this I still have no idea what happened! I am sure over the next couple of weeks I will figure it out though.

We drive for a few hours, then stop at a Walmart where I pick up a gallon of Mobil1 and a gallon of window wash. We grab some water and energy drinks. Leann grabs an air freshener.  :) women...

A few more hours of driving, trouble free.

We stop at a rest stop somewhere in the mountains. Use the facilities and snap some pictures. The engine fires up and we start rolling. As we approach the exit, and flood lights fade out, I realize we have no headlights! OH My GLOB!! no high beams, no low beams, no wipers. BUT if I hold the high flash the high beams do come on!
So now we are merging back onto the, thankfully empty, highway with only flashing highs. I realize this is ridiculous and screech to the shoulder once again. The headlight knob doesn't do anything no matter what position. I cycle it many times in frustration. Finally, the years of working on cars and the Bachelors degree in automotive engineering come back to me: I pound on the dash above the switch and PRESTO! lights burst on, vent fan kicks on, stereo comes to life! Hot damn, lets ride!!

Several more hours of mostly peaceful driving. Each time we stop for gas we need to do the light-pound procedure  which is interesting...

We eventually make it from SC, through NC, Tennessee, Kentucky, and finally into Indiana. We arrive at Tyler's casa at about 1:30AM sunday morning. we bullshit for a few hours, catching up on life and recounting all of the above, and have a beer, eventually drifting off to sleep. Tyler's couch is amazing by the way. I know where  i'm sleeping next time i visit!

In the morning Tyler gave us the driving tour of Columbus, Indiana and all of the Cummins facilities on the way to the restaurant. The Hanger 5 restaurant is a hard to find, but amazing to eat at establishment. Well worth the 20 minute wait! A hearty breakfast hit the spot after the last 24+ hours of garbage and travel. Tyler took the Porsche around the block and then we said our goodbye's and took our leave.

We had looked up the weather and there was a nasty winter storm forecasted  for around home, moving from northern IL into southern WI. After seeing large nasty radar maps before breakfast we decided to take the southern route through Peoria and up through Davenport and finally home. Luckily most of the storm never happened and we mostly drove through rain until Davenport.

Around crossing the river into Iowa, about sunset, the weather started getting worse. But most of the weather warnings were being lifted because of warm temperatures so we soldiered on! We did find a few slippery patches but never proper ice till we were actually in Dubuque, minutes form home.

The stupid huge Porsche turbo wheels did surprisingly well in the slippery conditions. Who knew Michelin pilotSport tires were okay on ice? crazy!

The end....
For now...

That is the story of getting the car. I am sure I will have many more amusing stories about all the crazy shit I have to fix and the ridiculous repair costs. :)

One more quick story: So far I have removed a 3.5farad stereo capacitor, about 8 feet of 4ga ground wire, a hardly-Davidson vanity plate and one quarter from 1994.